Nine out of ten people build in 28mm scale but every now and then we have to scale up or down.
At conventions people also ask me about working in other scales then 28mm scale. Although I am not used to work in a smaller scale I wanted to show people that working in 20mm scale goes quite well. For this purpose I made this Desert Fort.
Basically I used 4 rectangular, thicker blocks for the towers and 4 thinner rectangular blocks for the walls. The wall elements are cut out of a single block Styrodur. The towers Only got these buttress walls glued on to them. The door got two structures on them (check out the picture below compared with the ones above)